3.10 Tap HDMI-In Support

Rally Bar, Rally Bar Mini and Rally Board 65 support HDMI-IN content-sharing through Tap. This feature lets you connect HDMI input directly to your Tap device at the table, eliminating the need to run an HDMI cable from the table to the built-in HDMI port of your Rally Bar, Rally Bar Mini or Rally Board 65.

Prerequisites for Tap HDMI-IN feature

• Rally Bar and Rally Bar Mini

  • CollabOS 2.1.176 or higher.

• Rally Board 65 with CollabOS 2.1.255 or higher

• Tap

  • Tap must run the firmware v1.1.55 or higher

• Service Provider

  • Zoom Rooms Appliances

  • Teams Room on Android

• No HDMI-IN cable may be connected at the back of the Rally Bar, Rally Bar Mini or Rally Board 65

Known limitations

• Tap HDMI-IN is not supported in combination with the use of external USB cameras or the Zoom Rooms multi-camera feature on Rally Bar or Rally Bar Mini. If you desire to use an external USB camera, use only the HDMI-IN port of the Rally Bar or Rally Bar Mini.

• When using Tap HDMI-IN, the built-in HDMI-IN port on Rally Bar, Rally Bar Mini or Rally Board 65 must be left empty/disconnected.

• When using Tap HDMI-IN, screen sharing using the Rally Board 65 USB-C port is not supported.

• Tap HDMI-IN is not supported in combination with the deployment and use of Dual Sights with a Rally Bar or Rally Bar Mini. If you desire to use Dual Sight deployment, use only the HDMI-IN port of the Rally Bar or Rally Bar Mini for screen sharing.

Tap HDMI-IN Port 

Wiring Diagram - Tap HDMI-IN

Wiring Diagram - Tap HDMI IN with Rally Bar / Rally Bar Mini