MX Anywhere 3S

MX Anywhere 3S - Setup guide

LEARN MORE ABOUT YOUR PRODUCT

Product Overview

  1. MagSpeed scroll wheel

  2. Mode shift button for the scroll wheel — shift between line-by-line scrolling and free-spinning

  3. Battery status LED

  4. Silicone side grips

  5. USB-C charging port

  6. On/Off button

  7. Darkfield 4000DPI sensor

  8. Easy-Switch and connect button

  9. Back/Forward buttons

How to connect

  1. Make sure the mouse is turned on.
    The On/Off switch is located on the bottom of the mouse.


    The number 1 LED on the bottom of the mouse should be blinking fast.
    NOTE: If the LED is not blinking fast, do a long press of three seconds on the Easy-Switch button on the mouse bottom.

  2. There are two ways you can connect your mouse:

  • Use the included wireless USB receiver
    Plug the receiver into a USB port on your computer.

  • Connect directly via Bluetooth
    Open the Bluetooth settings on your computer to complete the pairing.
    Search for new devices and click on MX Anywhere 3 to connect.

Pair to a second computer with easy-switch

Your mouse can be paired with up to three different computers using the Easy-Switch button to change the channel.

  1. A short press on the Easy-Switch button will let you switch channels (from one computer to another). Select the channel you want and go to the next step.

  2. Press and hold the Easy-Switch button for three seconds. This will put the mouse in discoverable mode so that it can be seen by your computer. The LED will start blinking fast.

  3. Choose how you want to connect your mouse to your computer, Bluetooth, or USB:

  • Bluetooth: Open the Bluetooth settings on your computer to complete the pairing. More details here.

  • USB receiver: Plug the receiver into a USB port, open Logi Options+, and select: Add devices > Setup Unifying device, then follow the instructions.

Charging MX Anywhere 3
Connect one end of the provided charging cable to the USB-C port on the mouse and the other end to a USB power source.

mceclip9.png

A minimum of a three-minute charge gives you enough power for a full day of use. Depending on how you use the mouse, a full charge can last up to 70 days*.

* Battery life may vary depending on the user and operating conditions.

Battery Status

The LED on the top of the mouse indicates battery status.

mceclip10.png

The LED on the top of the mouse indicates battery status.

Green LED: Battery level at 100% - 11%.
Red LED: Battery level at 10% or less. 

AI assisted translation
Menu