Pairing Rally Bar / Rally Bar Mini with its remote control

These steps apply to Rally Bar, Rally Bar Mini, and Rally Bar Huddle.

The Pairing button is the button second from the right in between the Reset and Power buttons with the Bluetooth symbol below it.

Rally Bar in Appliance Mode:

1. Press and hold the Pairing button for 5 seconds to launch Pairing UI.

2. The Pairing User Interface will start, then follow the on screen instructions.

• Pairing will timeout if no activity 

Rally Bar in USB Mode:

1. Press and hold the Pairing button for 5 seconds to launch Pairing UI. The Rally Bar LED will blink Blue to show the pairing has started.

2. Press and hold the Volume Down and Zoom Out buttons on the remote. Once pairing is completed the LED will stop blinking.

Pairing will timeout if no activity.

Notes:

• This allows for Rally Bar BLE remote to pair with Rally Bar only. You cannot use Rally Bar as a Bluetooth speaker/speakerphone. 

• The bluetooth protocol used by Rally is BLE and for the connection of the included remote. It does not support bluetooth classic, A2DP or multiple signals.