Premium pan-tilt-zoom camera with Ultra-HD imaging
Conference Camera
Rally Camera
Warranty - Rally Camera
2 year limited hardware warranty At Logitech, it is our goal to ensure you are completely satisfied with your Logitech purchase. We take pride in the products and services we offer, and want our customers to enjoy them just as much as we do. If you are experiencing an issue, please visit the Logitech Terms of Use page learn more about the Logitech warranty. Alternatively, you can click the link below to file a warranty claim for your Logitech Business or Enterprise product. Make the Most of your warranty File a warranty claim Purchasing Business Product Spare Parts and Accessories
To purchase spare parts, please visit Logitech Spare Parts and Accessories. For customers in Japan: Please visit the dedicated Logicool Japan Spare Parts page. You can purchase accessories directly from Logitech or from a local reseller. Note: Availability of spare parts may vary by country. Please check with your reseller or place of purchase if you are not able to purchase spares from us directly. Google Meet ChromeOS - Supported Device Versions
Updated March 2026 Below you will find ChromeOS supported versions by Logitech Video Conferencing Products and if your Logitech products firmware can be updated by ChromeOS. If there is no version number in the cell for a given ChromeOS version and Logitech product, then it is currently not supported for that version. Important Notes: The table below scrolls horizontally using the scroller at the bottom of the table. New firmware updates are listed according to the ChromeOS release they were included in. If a cell is blank, assume the current version provided is the most recently listed one. Firmware updated by ChromeOS (CrOS)? ChromeOS Version M138 Platform 16295.54.42 ChromeOS Version M138 Platform 16295.54.32 CrOS M138 Platform 16295.54.19 CrOS M132 Platform 16093.68.40 ChromeOS Platform 16093.68.30 ChromeOS Platform 16093.68.20 CrOS M126 PR2 Platform 15883.63.37 CrOS M120 PR6 Platform 15662.80.53 CrOS M120 PR4 Platform 15662.80.38 CrOS M120 PR1 Platform 15662.80.26 CrOS M114 Platform 15437.59.32 ChromeOS M108 Platform 15183.82.33 CrOS M103 Platform 14816.84.43 ChromeOS M103 Platform 14816.84.32 ChromeOS M96 ChromeOS M92 Release Date Feb 23, 2026 Jan 5, 2026 Dec 1, 2025 Sep 2, 2025 Jul 18, 2025 May 5, 2025 December 12, 2024 September 16, 2024 July 29, 2024 May 6, 2024 January 31, 2024 September 5, 2023 August 7, 2023 April 10, 2023 May 16, 2022 December 12, 2021 Rally Bar Y 2.0.88 1.15.139 1.14.180 1.13.127 1.12.268 1.11.266 1.10.369 1.10.369 1.7.552 1.4.204 1.4.204 Rally Bar Mini Y 2.0.88 1.15.139 1.14.180 1.13.127 1.12.268 1.11.266 1.10.369 1.10.369 1.7.552 1.4.204 1.4.204 Rally Bar Huddle Y 2.0.77 1.15.115 1.14.130 1.13.121 1.12.135 1.11.171 1.10.286 1.10.286 MeetUp Y 1.0.272 1.0.272 1.0.265 1.0.265 1.0.264 1.0.264 1.0.264 1.0.264 1.0.264 MeetUp 2 Y 2.0.65 1.15.96 Tap Y 1.1.48 1.1.48 1.1.4 1.1.33 1.1.33 1.1.33 1.1.33 1.7.552 Rally Plus Y 1.2.135 1.2.69 1.2.69 Rally System Y 1.2.142 1.2.138 1.2.135 1.2.69 1.2.69 Rally Camera Y 1.1.227 1.1.227 1.1.227 1.4.0 1.4.0 1.4.0 1.4.0 PTZ Pro 2 Y 1.4.0 1.4.0 Swytch N 1.2.12 Scribe N Sight Y *Now updates when connected to a Rally Bar on a 4GB Chromebox for Meeting (8th Gen Intel Boards) 2.0.74 Rally Camera Compatibility
What computing systems support Rally Camera? Rally Camera will run with any USB-enabled computing systems that run the operating systems and versions listed below. Note that factors such as CPU speed and memory on your computing system can impact video performance. What operating systems support Rally Camera? Rally Camera is natively supported on the operating systems listed below through the UVC standard and does not need additional software. Operating systems supported for Rally Camera are: Windows Windows 10 and Windows 11 Latest two versions of macOS ChromeOS Version 29.0.1547.70 or later With which applications is Rally Camera compatible? Rally Camera video will work with any application that supports USB Video Class, which is pretty much any video conferencing application. Once the device is recognized by your operating system, the application will, in turn, recognize the Rally Camera. Specific applications include Microsoft Teams, Zoom, Google Meet , — to name a few. What USB cables can I use? Rally Camera ships with a USB 3.0 cable, which is provided at the maximum length allowable (2.2 M). The cable can also be plugged into a USB 2.0 port. USB 3.0 cables have a shorter maximum length so you may need to adjust the placement of your computer platform or use a USB 2.0 cable. What video conferencing software can you use with Rally Camera? Or is that built in? Rally Camera is built to work across a large variety of video conferencing applications, offering the best video performance in these applications. Logitech does not offer video conferencing software, although we offer applications and tools to optimize the hardware experience like our Camera Setting application. Does Rally Camera work with Microsoft Teams, Zoom, and Google Meet? Rally Camera is designed to work across any video conferencing software, including those listed above, or just about any conferencing software that will run on a USB-enabled computing system (Windows, Mac or Chrome). Logitech partners with many vendors to provide you a wide selection of the software and hardware you prefer to work with. How do I upgrade my firmware and what platforms do you support? We support firmware updates for both Windows and Mac platforms. When a firmware upgrade is available for your camera, you'll be able to download a firmware application tool from Logitech. When you launch the tool, it upgrades the camera’s firmware. Check the Rally Camera Download page for the latest firmware upgrades. In addition, we also provide over-the-air updates for customers who allow them, and Windows Update, Microsoft’s tool for automatically updating the Windows operating system, will also provide firmware updates if Windows Update is turned on. NOTE: Before you run the upgrade, make sure the camera driver has been completely installed and isn't in use by other applications. Does Rally Camera work with WebRTC solutions (Chrome, Firefox, etc)? Rally Camera is compatible with standard WebRTC, although different builds may have different requirements that should be evaluated. Rally Camera Streamline Kit - Specifications and Certifications
In this article you will find detailed specifications for the Rally Camera Streamline Kit as well as service provider specifications. What is the Rally Camera Streamline Kit? Logitech Rally Camera Streamline Kit is a USB PTZ video solution for engaging HyFlex teaching and presentations in large spaces through simple wireless preset buttons and deployment via category cable. Specifications Assembled Dimensions Component Measurement Rally Camera w/Camera Side Base and Wall Mount Length: 6.97in / 177mm Width: 5.83in / 148mm Height: 8.27in / 210mm Weight (with cover): 5.44lb / 2.47kg Rally Camera with Camera Side Base and 1.5in NPT Adapter Length: 5.83in / 148mm Width: 5.83in / 148mm Height: 8.66in / 220mm Weight: 4.45lb / 2.02kg Individual Component Dimensions Component Measurement Rally Camera Height: 7.19in / 182.5mm Width: 5.98in / 152mm Depth: 5.98in / 152mm Weight: 3.35lb / 1.52kg Camera Side Base Diameter: 6.04in / 153.3mm Height: 1.24in / 31.5mm Weight: 9.02oz / 255.8g Control Side Box Length: 5.30in / 134.7mm Width: 4.61in / 117.2mm Height: 0.90in / 22.8mm Weight: 4.850z / 137.5g Twist-to-lock Mount Plate Diameter: 5.42in / 137.6mm Height: 0.73in / 18.66mm Weight: 1.49oz / 142.1g Wall Mount for Rally Camera Extension Kit Length: 6.50in / 165mm Width: 5.31in / 135mm Height: 5.83in / 148mm Weight (without cover): 22.58oz / 640g Weight (with cover): 22.93oz / 650g 1.5in NPT Adapter for Rally Camera Extension Kit Diameter: 4.63in / 114.5mm Height: 0.60in / 15.2mm Weight: 7.05oz / 200g Rally Camera Preset Button Diameter: 2.83in / 71.9mm Height: 0.60in / 15.2mm Wall Mount Diameter: 2.65in / 67.2mm Wall Mount Height: 0.23in / 5.8mm Weight (with button mount and 2-CR2032 batteries): 1.52oz / 43.2g General Product Specifications and Details System Requirements Windows 10 and higher macOS: two most recent versions USB 2.0 compatible devices Category cable support Cat5e or better with cable diameter up to 7.4mm. Performance and length supported will vary by cable up to 100m. Warranty Information 2-Year Limited Hardware Warranty 1-Year and 3-Year Extended Warranty available for purchase Ports and Interfaces Component Port/Interface Control Side Box Front: Reboot button LED status indicator Rear: USB-C (from Control Side Box to user device) RJ45 to Camera Side Base DC Power Connection Built-in cable retention Mounting slots Camera Side Base Integrated USB-C cable (from Camera Side Base to Rally Camera) RJ45 to Control Side Box LED status indicator Preset Button Bluetooth® Low Energy Switch mechanism to lock/unluck preset and Bluetooth® pairing functionality LED status indicator Mounting Component Mounting Details Control Side Box Mounting Slots: 2 through-slots for mounting directly to the wall, table or shelf Camera Side Base VESA: 75x75mm Tripod: ⅝-27 and ¼-20 Twist-to-lock: for mounting directly to twist-to-lock mounting plate Preset Button Mounting Plate Mounting Holes: 2 through-holes for mounting directly to the wall or table (mounting hardware included) Adhesive Strip Placement: 2 designated areas for placement of small adhesive strips 46 x 16 x 16mm (1.8 x 0.63 x 0.63in) - adhesive strips not included Wall Mount for Rally Camera Extension Kit Mount directly to a 2-gang box or standard wall surface such as drywall (mounting hardware included) 1.5in NPT Adapter for Rally Camera Extension VESA: 75x75mm (mounting hardware included) Power and Cables Power supply Operating Voltage/Power 100-240V, 48V, 1.0A Power Supply Dimensions 2.71 x 1.33 x 2.81in / 68.9 x 33.9 x 71.3mm DC Cable 5ft / 1.5m USB-C to USB-C 2.1 Cable 6.56ft / 2m USB-C to USB-A 2.1 Adapter 1.46in / 37mm Preset Button 2x CR2032 batteries Camera Specifications HD Imaging System Supports 1080p, 900p, 720p and SD at 30fps 1080p, 720p at 3ofps Smooth motorized pan, tilt and zoom Pan: ±90° Tilt: +50° / -90° Zoom: 15X HD lossless zoom Field of View (FoV) Diagonal: 90° Horizontal: 82.1° Vertical: 52.2° Autofocus Yes Remote Control RF remote control (line of sight not required) CR2032 battery (included) Security Lock Kensington security lock slot Package Contents Rally Camera Streamline Kit Rally Camera Remote Control Camera Side Base Control Side Box Twist-to-Lock Mounting Plate Power Adapter with regional plugs USB-C to USB-C cable with USB-C to USB-A Adapter (length 2m) ⅝-27 to ¼-20 threaded adapter Wall mount with cover and mounting hardware NPT Adapter Mount with mounting hardware 3 x Preset Buttons with button mounts (mounting hardware included) and pre-installed CR2032 batteries (w. pull tab) Rally Camera Extension Kit Camera Side Base Control Side Box Twist-to-Lock Mounting Plate Power Adapter with regional plugs USB-C to USB-C cable with USB-C to USB-A Adapter (length 2m) ⅝-27 to ¼-20 threaded adapter Wall Mount for Rally Camera Extension Kit Angled Wall Mount Magnetic Wall Mount Cover Mounting hardware 1.5in NPT Adapter for Rally Camera Extension Kit 1.5" NPT Mounting Plate Mounting hardware Rally Camera Preset Button Preset Button Button Mount 2 x CR2032 coin batteries Mounting hardware Certifications Rally Camera is Certified with the following service providers: Microsoft Teams Zoom Google Meet Rally Camera - Specifications
Rally Camera is Logitech’s most robust and advanced video camera solution for classrooms, auditoriums, boardrooms, and mid to large sized meeting rooms. With advanced optics, premium design, and RightSense™ automation, Logitech Rally Camera delivers boardroom-quality video conferencing including automatic framing and optimized light and color to deliver high-quality HD video. Rally Camera Product Information Product Information Model Number (M/N): V-R0010 S/N Location: Underneath camera Product Dimensions Rally Camera Height: 7.19 in (182.5 mm) Width: 5.98 in (152 mm) Depth: 5.98 in (152 mm) Length: N/A Rally Camera Power Splitter Height: 0.84 in (21.4 mm) Width: 3.19 in (81 mm) Depth: 2.38 in (60.5 mm) Length: N/A Rally Camera Mounting Bracket Height: 3.46 in (88 mm) Width: 4.33 in (110 mm) Depth: 6.69 in (170 mm) Length: N/A USB 3.0 Cable Height: N/A Width: N/A Depth: N/A Length: 7.2 ft (2.2 m) Power Adapter Cable Height: N/A Width: N/A Depth: N/A Length: 9.8 ft (3 m) General Product Specifications Wireless Protocol: Remote control BLE Wired Network Support: N/A Software Support: Logitech Sync App Interfaces USB: 1 x USB-C Kensington Lock: 1x Kensington Lock MIPI: 1 x MIPI port OS/Platform Support Operating Systems Windows 10 and Windows 11 Mac latest two versions of macOS Chrome OS Resolutions higher than 1080p Windows 10 or higher mac OS 10.10 or higher System Requirements Resolutions higher than 1080p Windows 10 or higher or Mac OS 10.10 or higher USB 3.0 port and Type C cable Compatible software Required Accessory: N/A Power Type: A/C (power supply included) Physical Security: Kensington Security Port Webcams and Security Specifications Connection Type: USB Indicator Lights (LED): LED on camera used for streaming state and pairing remote control Microphone: None Recording: With user supplied software applications. Mountable: Rally Camera includes a wall mount and can also be tripod mounted using the affixed 1/4" 20 threaded insert. Buttons / Switch: On the remote: Pan/tilt/zoom: 3 presets Video mute: Home Lens and Sensor Type: Glass/4K Focus Type: Auto Zoom: Yes; 15x HD zoom (5x optical, 3x digital) Diagonal Field of View (FOV): 90° Horizontal Field of View (FOV): 82.1° Vertical Field of View (FOV): 52.2° Pan: ±90° Tilt: +50° / -90° Focal Length: Wide: 3.725mm, Tele : 17.88mm Depth of Field: 60 cm to infinity in wide mode Sensor Resolution: 4k Frame Rate (max): 60 Night Vision: N/A Plugs Slider: N/A Onboard Storage: N/A USB Protocol: 3.0 UVC Support: 1.5 Battery Details: Remote control uses two CR-2032 batteries Cable Length: USB cable: 2.2m Cable Length (Power/Charging): 3m Power Adapter: AC/DC 100-240V 50/60Hz Microphone Type: N/A Audio Output: N/A Remote: Yes Remote Type (Specifications): RF (Bluetooth Low Energy) Speaker Type: N/A Optical Resolution: 4K Image Capture (4:3 SD): N/A Image Capture (16:9 W): N/A Video Capture (4:3 SD): N/A Video Capture (16:3 9): N/A Right Light: Wide Dynamic Range Video Effects (VFX): No Privacy: Camera rotates down when video has stopped streaming Tripod Mounting Option: Yes Universal Clip Adjustability: No Camera weight: 1,510 grams Logitech Rally Camera Streamline Kit Setup Guide
Getting Started ⚠ ATTENTION: When mounting Rally Camera Streamline Kit to a wall or inverted mount, please make sure the power is disconnected from the Control Side Box while connecting the camera with the attached base to the category cable. Failure to do so may result in permanent damage to Rally Camera. Table of Contents Connecting Rally Camera to the Camera Side Base NOTE: If you have purchased the Rally Camera Extension Kit to use with an existing Rally Camera or purchased one separately, you will need to remove the rubber plug from the bottom of your Rally Camera before connecting the Camera Side Base. Place the Camera Side Base on a flat surface and connect the internal USB-C cable to the USB-C port on the bottom of Rally Camera Press the cable into the routing channel, ensuring the pegs are properly aligned, and attach the Rally Camera to the base Hold both components together and flip the unit over Use a Phillips screwdriver to tighten the ¼-20 screw, securing the base to the camera. Note: If you intend to mount to a tripod, please insert the ⅝-27 to ¼-20 included adapter after securing the base to the camera. Mounting Rally Camera Streamline Kit You have two mounting choices for Rally Streamline Kit: Wall mount (this mounting method applies to mounting the camera to a 2-Gang box or directly to a wall surface) To install the Wall Mount - attach the Twist-to-Lock Mount Plate to the base using the four provided M4 screws, these should be inserted from the Twist-to-Lock Mount Plate Side. Make sure the camera icon and arrow on the Twist-to-Lock Mount Plate face the desired direction Secure the mount to the wall with the included hardware or four #6-32 - 1/34” removable screw anchors Connect a Cat5e (or better) cable to the camera’s RJ45 port. Align the camera base arrow with the mount plate arrow and rotate counterclockwise to lock. Cover the mount plate with the magnetic cover, then connect power to the Control Side Box. NTP drop-down pole To install the 1.5in NPT Adapter, secure it to your 1.5in NPT drop-down pole, and insert the set screw to secure the NPT adapter plate in place. Attach the Twist-to-Lock Mount Plate to the adapter with the provided M4 screws, these should be inserted from the Twist-to-Lock Mount Plate side. Make sure the camera icon and arrow on the Twist-to-Lock Mount Plate face the desired direction. Connect a Cat5e (or better) cable to the camera’s RJ45 port. Align the camera base arrow with the mount plate arrow, and rotate counterclockwise to lock the camera in place. Connecting to the Control Side Box Connect a Cat5e (or better) cable to the RJ45 connector on the bottom of the Camera Side Base. On the Control Side Box, remove the cable clamp bar by loosening the thumbscrews. Attach the other end of the cable to the RJ45 connector on the Control Side Box, then connect the power and USB-C cable to their respective ports. Reattach and tighten the thumbscrews on the cable clamp bar continuing to ensure cables are seated in the clamp's channels. Connect the USB-C cable to a computer or laptop. When the Control Side Box is powered and connected, a green LED will flash on the front of the Control Side Box and the back of the Camera Side Base. Preset Button Setup Pairing the Preset Buttons to Rally Camera Preparation Remove the battery pull tabs on each of your Preset Buttons and make sure the switch on the back of the button is in the unlock position. Ensure Rally Camera is on and connected to a computer before you continue. There are two ways to activate pairing mode on your Rally Camera: Using the remote Press the following button sequence (within 8 seconds after starting): Home, Zoom Out, Zoom Out, Zoom In, Zoom Out, Home If successful, a blue LED on the front of the Rally Camera will begin flashing. Using the button on the back of Rally Camera The second method is to press and hold the button on the back of the Rally Camera for 5 seconds or until the LED on the front flashes blue. Once pairing mode has been activated, release the button. You can now pair the Preset Button. Press the Prest Button for 10 seconds or until seeing the visible indicator that pairing has completed. Pairing is complete when the button LED flashes blue and Rally Camera led stops flashing. Repeat these steps until all Preset Buttons are paired to the Rally Camera NOTE: The Preset Button LED may turn white or flash yellow during the pairing process. Please ignore this and continue to press and hold the button for 10 seconds (or until pairing is completed). NOTE: If the button is not mounted, or the button mount is not attached, you may need to press the button by squeezing it, with your fingers on the back of the button and thumb pressing the front to fully engage the button. How to Set Up and Save Presets Unlock the switch on the back of the button. With the camera mounted and the Control Side Box powered on and connected, open a camera app, video conferencing software, or Logitech Sync to connect to the Rally Camera. Use the Remote Control to pan, tilt, and zoom to the desired scene. Hold the Preset Button for 3 seconds until the LED flashes white. Release the button when the LED flashes white to avoid entering pairing mode. Lock the switch on the back of the button to prevent accidental resets of the preset position. Mounting the Preset Button To enhance user experience, we recommend positioning or mounting the Preset Buttons near the area shown in the saved preset scene. You can mount the mounting plates using the included screws or with small adhesive strips (not included). After securing the mounting plate, align the button and rotate it clockwise to lock it in place. Press the button to confirm the LED lights up and the preset position is correctly recalled. NOTE: We recommend using small adhesive strips with a maximum size of 46 x 16 x 16 mm (1.8” x 0.63” x 0.63”). Logitech Rally Camera - Quick Setup Video
If you need some visual dynamic guidance on how to setup Rally Camera please take a look at the following video: https://www.youtube.com/watch?v=KdSkuIIgCN4 Rally Camera Presets Guide
Below you will find information regarding camera presets for Rally Camera and Rally Plus. For information regarding camera presets when using the Rally Camera Streamline Kit, please refer to Streamline Kit: Preset Button Support. How do I set a camera preset? You can set up to 2 preset positions. Once in the desired position, save a preset by pressing and holding the button for 3 seconds. Return to the desired position at any time by pressing the button once. Where Presets are Stored Zoom Web Portal (Cloud): Administrators can define the Default Camera Control Mode in the Zoom portal under Room Management > Zoom Rooms > Devices. If you enable "Use default preset position," Zoom will instruct the camera to move to a specific saved preset every time a meeting starts. Zoom Room Controller (Local App): Users can create and rename up to three presets directly on the Logitech Tap or Tap IP. These presets are stored as part of the Zoom Room's configuration. To save one, you simply use the camera controls on the Tap to position the camera, then press and hold a preset button to save it. Logitech Hardware (On-Device): You can save two presets directly to the Rally Camera's memory using the physical Logitech remote. Note: While these are stored on the camera, the Zoom Rooms application often overrides hardware-stored positions with its own "Home" or "Default" settings defined in the Zoom portal. Change the default home position for Rally Camera / Rally Plus Using the included remote that came with the Rally camera, a new default home position can be set, and two presets can be saved. Home Position - Setting a new default home position will move the camera to this position by default once the camera is powered on. If the camera is adjusted from this position, hitting the Home button on the remote will return the camera to this same position. To set a new default home position: Pan, tilt, and zoom the camera to the preferred position using the remote. Hold the Home button on the remote for approximately 10 seconds, or until an audible tone is heard from the speaker. User Presets - Two preset camera positions can be saved to the remote and hitting the ‘Preset 1’ or ‘Preset 2’ buttons will move the camera accordingly. To save a new preset: Pan, tilt, and zoom the camera to the preferred position using the remote. Hold the button for Preset 1 or Preset 2 on the remote for approximately 3 seconds, or until an audible tone is heard from the speaker. Rally Camera (standalone) Remote Rally System Remote Rally Camera zoomed-in preset When using a preset on Rally Camera, there is a tolerance on the preset position of +/- 2°, which may be noticeable when the camera is fully zoomed in. Rally Plus preset audio levels The default volume level of Rally Plus is managed by the Video Conferencing Application and/or the Operating System running on the connected compute device. Since Rally Plus is a modular peripheral, it follows the volume commands sent by the host device. Here is how to set a default volume based on your setup: Microsoft Teams Rooms (MTR) on Windows MTR typically resets the volume to a default level (usually 50%) at the start of every meeting or after a reboot. You can modify the SkypeSettings.xml file on the MTR compute to define a custom default volume. Key Setting: <DefaultAudioInVolume>50</DefaultAudioInVolume> and <DefaultAudioOutVolume>50</DefaultAudioOutVolume>. Changing these values allows the room to always start at your preferred level. Zoom Rooms Zoom Rooms allow for a "Default Speaker Volume" to be set via the web portal. Log in to the Zoom Web Portal, navigate to Room Management > Zoom Rooms. Select the room, go to the Edit tab, then Audio. Look for "Default Speaker Volume" and set it to your desired percentage (e.g., 60%). Rally Plus will snap to this level at the start of every session. Logitech Sync (CollabOS / RoomMate) If your Rally Plus is connected to a Logitech RoomMate, you can manage the volume through the Logitech Sync Portal. Note: While Sync doesn't currently have a "Default Startup Volume" toggle, you can use Remote UI in Sync to manually set the volume levels across your fleet without being physically in the room. Windows System Volume (USB Mode/BYOD) If Rally Plus is connected to a standard PC for general use: Windows remembers the last used volume for specific USB devices. If you set Rally Plus to 60%, it should remain there until manually changed. However, third-party "deep freeze" software or group policies may reset this on reboot. TV Mount for Video Bars
TV Mount for Video Bars is designed to mount Rally Camera, Rally Bar or Rally Bar Mini above, or beneath, a TV display. Rally Bar Huddle comes with its own Multi-Mount, which allows it to be mounted on a table, to the wall, or to a display TV. Instructions for mounting Rally Bar Huddle can be found here: Rally Bar Huddle Multi-Mount Guide. Rally Bar Huddle can also be mounted using the TV Mount for Video Bars, but requires an additional set of screws. Screws sized 1/4-20 at 9-10mm in length can be found online or in most hardware stores. TV Mount for Video Bars works with wall and cart-mounted displays up to 247.92 cm in size (measured diagonally). Note: TV Mount for Video Bars is designed to accommodate a variety of TV sizes. However, compatibility is ultimately contingent upon the TV's VESA mounting configuration. TV Mount - Quick Guides Getting Started with RightSight
This article aims to provide information and details related to RightSight. RightSight is Logitech’s auto-framing technology that ensures meeting participants are always perfectly framed. The below information pertains only to RightSight. Up to date information for RightSight 2 can be found here. How does RightSight work? RightSight uses the latest in deep learning technology running on the PC to detect meeting participants and perfectly frame them regardless of if they are speaking, where they are looking, or if they are at the whiteboard and not looking towards the camera at all. Compatibility Windows / macOS RightSight is supported on the following devices connected to a Windows 10 (64-bit) PC (or newer) or a Intel-Based Mac running macOS 10.14+. MeetUp Rally / Rally Plus Rally Camera Rally Bar Rally Bar Mini Note: The ability to use RightSight on Windows / macOS requires that Logitech Sync be installed. See our macOS software compatibility list here. CollabOS RightSight is also supported on the following divides when connected to RoomMate running CollabOS 1.7+. See 3.2 RightSight on RoomMate. MeetUp Rally / Rally Plus Rally Camera Setup To get RightSight on your MeetUp, Rally / Rally Plus, or Rally Camera on Windows/macOS, make sure you have installed Logitech Sync and the device has the latest firmware update. RightSight is an integrated feature in video conferencing products that run CollabOS and can be managed in Sync and from the on-device Logitech settings menu. Windows / macOS Updating your device’s firmware will automatically enable RightSight. Note: Before you run firmware updates, make sure your device drivers have been completely installed and your device isn’t in use by other applications. Install the latest firmware via the Logitech Sync local app. Once the installation steps have been completed, you should now see the process named Logitech RightSight Service (x86) in Windows Task Manager / macOS Activity Monitor. This means the service has been installed and is running. To toggle RightSight on or off, in the Logitech Sync application, navigate to your device settings. CollabOS On your Tap / Tap IP connected to the host Roommate, navigate to the System Settings menu. Select Camera > RightSight Enable RightSight Set RightSight to Dynamic or On call start Dynamic will allow RightSight to make adjustments during the meeting. On call start will allow RightSight to adjust only when starting a meeting.
Related Resources
Logitech Sync
Enterprise management & monitoring of Logitech's business products