1.3 Getting Started: Provisioning Codes
You can use provisioning codes to simplify the process of adding CollabOS devices to Sync. To add a CollabOS device to Sync using a provisioning code, you will first need to generate a code in Sync Portal and then enter the code when asked in:
On-device out-of-box setup experience
On-device settings
Local Network Access
What you need to get started:
Device running CollabOS 1.7 or higher
Generating a Sync provisioning code
There are two ways to generate a provisioning code in Sync Portal:
When creating a new room
With an existing room
How to generate a provisioning code when creating a new room
Navigate to Inventory in the Meeting Rooms tab.
Click Add room near the top right corner.
Select Empty room.
Enter a Room Name and then select Create. (Note: Seat Count is optional)
Once the room is created, navigate to that room in your meeting room Inventory and the provisioning code will be shown.
If no code appears when viewing the room, click Generate code.
How to generate a provisioning code with an existing room
Navigate to the room you want in your meeting room Inventory.
In the upper left corner click on Provision
The code will automatically be generated in the center of the screen
If no code appears after clicking Room provisioning code, click Generate code.
How to use a provisioning code on a device
Using out-of-box setup experience
Set up your device using touch controller or a device remote.
On Logitech Sync screen, tap on Enter provision code.
Input the 12-digit provisioning code generated in the Sync Portal.
Using on-device settings
Go to Logitech settings.
Tap on Sync and select Connect to Sync.
Tap on Enter provision code.
Input the 12-digit provisioning code generated in the Sync Portal.
Using Local Network Access
Login to your Local Network Access portal.
Navigate to Sync and select Connect to Sync.
Input the 12-digit provisioning code generated in the Sync Portal.
