Common Pre-sales FAQs for Tap with Cat5e Kit

Below you will find a collection of frequently asked questions and answers for Tap with Cat5e Kit

What is Cat5e Kit for Logitech Tap?

Cat5e Kit for Logitech Tap is a USB Over Cat5e Extension Kit that combines both USB and Power over a single connection to Logitech Tap up to 40m/131ft away from the meeting room host computer or system. As part of the solution, the AC power connection can be made anywhere along the route between the meeting room computer and the Logitech Tap.

What problems does Cat5e Kit for Logitech Tap solve?

  • The Cat5e Kit enables a clean single cable connection to Tap

  • The Cat5e Kit replaces the fixed length (10/25/45m) Logitech Strong USB with Cat5e which can beĀ  cut to specific length and terminated in the field by an IT or AV professional.

  • The Cat5e Kit removes the requirement to connect Logitech Tap to power within close proximity to Tap. Power connection can be anywhere between the Room System Host and Tap

    • One less power connection required to be at the table

    • No need to connect power close to an otherwise clean wall installationĀ 

Will the Cat5e Kit work with an existing Logitech Tap purchased in the past?

Yes, the Cat5e Kit for Logitech Tap works with all existing Logitech Tap units.

What type of category cable can I use with Cat5e Kit for Logitech Tap?

The kit includes Cat5e SF/UTP AWG 26.Ā  Category cable meeting or exceeding this spec is recommended.Ā  There are four elements to consider:

  • Category Class: Cat5e, Cat6, Cat6a, Cat7 and so forth

  • Shielding: SF/UTP or SFTP

  • AWG: 26, 24, 23 and so forth.

  • Compliance Requirements: Plenum or local building/safety codes

By Example: Supported:Ā  Cat6a SFTP AWG 24

Unsupported: Cat5 UTP AWG 28

What is included with Cat5e Kit for Logitech Tap?

  • TAP Receiver

  • Dongle Transceiver

  • 100-240v PoE Injector with international adaptor set

  • 2.97 m/9.74 ft Cat5e cable

  • 7 m/22.9 ft Cat5e cable

  • User documentationĀ 

Which Tap with Cat5e Kit parts will be available as spares?

Each individual part will be available as a spare

  • Tap Receiver

  • Dongle Transceiver

  • 100-240v PoE Injector with international adaptor set

  • 2.97 m/9.74 ft Cat5e cable

  • 7 m/22.9 ft Cat5e cable

To purchase spares, please visit this link.

Note: Spares may not be available directly from our spare parts store in all countries. Please check with your reseller or place of purchase you are not able to purchase spares from us directly.

AI assisted translation
Menu