Microsoft UEFI Certificate Fix

With the NUC 8 and 11, the UEFI certificates will expire.  This process will inject the new keys into the system.  The process does require access to the system and takes about 10 minutes to complete.

This is a manual process that requires keyboard and mouse access to the compute. It cannot be done remotely.

  1. Download the scripts required to update the system from: https://gtm.vc.logitech.com/ASUS/UpdateSecBootKeys.zip

  2. Extract the files to a physical driver, do not use a USB or network connection.  All files must be placed in the same directory, for example c:\rigel\oem.

  1. Right click on the file UpdateSecureBootKeys and choose run as administrator:

  1. Click Run at the confirmation prompt

  2. A command prompt will open. This will check if Btlocker is enabled and a couple of other checks. If BitLocker is enabled, it will suspend it.  The fix cannot be injected with Btlocker running.

  3. At the confirmation prompt at the end, Press Y to make the changes

  4. The system will reboot into the BIOS.  If it doesn't the system will reboot back into Windows. The command prompt will start up again, and prompt to reboot, this time press F2 during POST to enter the BIOS.

  5. Click on Boot in the Tabs and then Secure Boot submenu\:

  1. Then choose Custom under Secure Boot Mode.  This will enable the sub options

  2. Click the option Reset to Setup Mode:

  1. Press F10 on the Keyboard to save and reboot the system

IMPORTANT: The system will reboot into Bios, Press F10 to save and continue.  Do not change the Secure Boot Mode, leave it as Custom.  Changing it to Standard will reset the keys you just injected.  The BIOS will remain at Custom indefinitely. 

  1. The system will start backup.

  2. Enter the Windows Desktop and the command prompt will appear again:

  1. Press Y to Update the Secure Keys.

  2. The system will reboot back into the BIOS.

  3. Press F10 to Save and Exit.  DO NOT change the Secure Boot Mode back to Standard.

  4. Log back into the Windows Desktop and the DOS prompt will once again display to confirm the keys have been updated.

  5. The process is now complete.

AI translated ⓘ
This content was translated by AI. Accuracy may vary.
Report an issue here.
Menu