Headset

Zone Wired 2

USB headset features premium audio drivers and advanced noise-canceling mic technology

  • Learn About TCO Certification

    You may learn more about TCO Certified with this document:

  • Zone Wired 2 Setup Guide

    Below is a quick setup guide to assist you with setting up and using your Zone Wired 2 headset. Zone Wired 2 Setup Guide

  • How does the silent firmware update work on Zone Wireless 2 ES and Zone Wired 2?

    1. Set up Logi Tune and personal device management in Sync as per this article (Check ‘Setup’ section). 2. Publish Updates from Logitech Sync as per this article (See ‘Publishing Updates’ section). 3. New firmware will be automatically installed when the headset is not in use to prevent interruptions: Zone Wireless 2 ES: Installation will occur when the headset is turned off. Zone Wired 2: Installation will occur when the headset has been idle for 5 minutes.

  • Controls and light indicator on Zone Wired 2

    Below you will find a guide covering the controls and light indicator on Zone Wired 2: Controls NOTE: Voice prompts indicate when the mic is mute on/off. Call controls Answer / End call - Short press Reject call - 2 seconds press Media controls (Enable with Logi Tune) Play / Pause - Short press Next Track - Double press Previous track - Triple press Volume controls Volume up - Short press "+" Volume down - Short press "-" ANC controls Toggle between ANC and Transparency On - Short press ANC off - 2 seconds press Mute Mute on - Mic book flip up Mute off - Mic boom flip down Connector Light Indicator White Solid - Ongoing call Flashing - Incoming call Red Solid - Mute on Purple and White Blinking - Headset firmware updating

  • How do I connect my Zone Wired 2 headset?

    Zone Wired 2 headset can be connected to your computer via USB-C or USB-A (using the included adapter).

  • What is Enable EQ for calls on Zone Wired 2?

    Zone Wired 2 headset is designed to deliver an optimized audio experience by automatically switching between call and music modes. Call mode focuses on speech sound clarity, while music mode enhances bass and treble for a richer sound experience. You can customize your music mode sound using the equalizer in the Logi Tune app. Additionally, you can now apply your preferred music equalizer settings to your call audio, allowing you to enjoy the same sound experience for both music and calls. To enable this feature, open Logi Tune, go to the Equalizer and toggle on ‘Enable EQ for calls'.

  • What is Power Saving Mode on Zone Wired 2?

    After 30 minutes of being idle, headset will turn off ANC and light indicator to save power consumption. To wake up the headset, simply start using the headset, start a call, listen to music or press a button. Enable it on Logi Tune app.

  • How long is the Zone Wired 2 cable?

    Zone Wired 2 has a cable length of 1.9m/6.23ft.

  • What are ANC, Transparency and Adaptive ANC modes?

    Active Noise Cancellation (ANC) minimizes ambient noise, allowing a focused and uninterrupted audio experience by blocking out distractions in your surroundings. Hybrid ANC is the most advanced type of ANC, capable of suppressing a broader range of frequencies while delivering enhanced accuracy in noise reduction. Adaptive ANC is one of ANC modes that automatically adjusts noise cancellation levels in real-time for optimal performance. Using built-in microphones, the headset detects ambient sound levels and seamlessly switches between ANC High and ANC Low modes to match your environment. Whether you're moving from a quiet room to a busy open workspace, Adaptive ANC ensures optimized noise suppression for the best possible audio experience. Transparency mode, on the other hand, is designed to pass through external sounds, keeping you aware of your surroundings while wearing the headset. It’s useful for situations like having conversations or staying alert to important announcements—all without needing to remove the headset. Your headset is set to ANC High mode by default. The ANC button on the headset lets you manage ANC modes easily—short press to toggle between ANC High & Transparency Mode, and long press to turn off ANC. To access Adaptive ANC mode or customize the ANC button, use the Logi Tune app.

  • What is Mic EQ?

    With Mic EQ (Microphone Equalizer), you can adjust your voice to be brighter or deeper so that you can be heard better to others. The "best" option fully depends on your own preference and purpose. Experiment with your headset to find a preset that works best for you! You can adjust the Mic EQ through the Logi Tune desktop app.

Related Resources

    Logi Tune App

    Manage settings & updates to get more out of your webcams and headsets

    Logitech Sync

    Enterprise management & monitoring of business devices, including webcams and headsets

AI translated ⓘ
This content was translated by AI. Accuracy may vary.
Report an issue here.
Menu