How to Pair Tap IP with Zoom Rooms on PC
This article outlines the process of pairing a Logitech Tap IP with a PC running Zoom Rooms.
Non-bundled PCs and Mac computers: For guidance on these systems, refer to Zoom's official Getting started with Zoom Rooms guide.
Tap IP compatibility: For the latest information regarding Tap IP compatibility with various conferencing platforms and operating systems, please refer to the Tap IP Compatibility guide.
Initial Setup and Connection
Connect Tap IP to the same network as the Zoom Rooms PC. For seamless discovery and communication, both devices must be on the same network and subnet.
Power on Tap IP and follow the on-screen setup instructions. The device will guide you through configuring regional settings, network connections, and selecting Zoom Rooms as the service provider.
Pairing with Zoom Rooms
Initiate Pairing: During the Zoom Rooms setup, the PC will prompt you to pair a controller. Simultaneously, the Tap IP will display a prompt to enter a pairing code.
Find the pairing code: The Zoom Rooms PC will display a unique pairing code.
Enter the code: On the Tap IP's screen, input the pairing code displayed on the Zoom Rooms PC.
Sign In to Zoom Rooms: After successful pairing, the Tap IP will prompt you to sign in to set up the Zoom Room account and license. The sign-in process can be completed in two ways:
Admin Sign-in: You can sign in using administrator credentials. This allows you to create or select an existing Zoom Room to access.
Activation Code: Alternatively, you can use an activation code generated from the Zoom Device Management (ZDM) portal. Once you enter the code, the room setup is complete.
For more information on signing into Zoom Rooms, please refer to this Zoom support article.